Attiva Flushable Ostomy Pouch Liners (#FPL-2, Size Large), 100/bx

Size Large suitable for pouch openings (2-1/4") 57mm and larger

Extend ostomy pouch weartime with new and improved Attiva flushable liners

Insert into your ostomy bag before attaching them to the flange. Protect your bag from output and easily empty your bag without a mess.

 Details:

• 100 per box
• Special guards around the vent hole area to prevent leakage through the optional vent holes (patient must punch vent holes with a pin if desired)
• Specially shaped guards to prevent leakage through the vent holes
• Double fit heat seals to prevent leakage at the liner perimeter
• Liners are flushable, increase wear time, have two sizes to choose from and are double heat sealed.
• Size Large: Fits pouch openings 57mm (2-1/4") and 70mm.
• Do not use in septic tanks! For weak flushing toilets or toilets with low water, empty contents of liner into toilet and discard liner.

How to insert the liner

1. With a pin, create 1 or 2 holes in the “shoulders” of the liner, to allow gas to escape the liner. 

2. With dry hands, insert the liner into the pouch opening.

3. Spread open the liner within the pouch by inserting two fingers into the liner opening, and spread the liner out.

4. Position the opening of the liner over the pouch ring, with about 1” of liner remaining outside the pouch.

5. Blow into the liner to open it up, and smooth out any wrinkles around the pouch ring.

6. Attach the pouch with the liner inserted onto the flange / wafer. The exposed portion of the liner should be sandwiched between the flange / wafer and the pouch.

How to remove the liner

1. Pull the liner slightly, but not completely out of the pouch.

2. Grab one corner of the liner and pull it out. The rest of the liner should easily come out now.

3. Flush the liner and its contents down the toilet.