SUR-FIT Natura Stomahesive Skin Barrier with Flange, 40157x, 10/bx

ConvaTec

MSRP: $58.70
$53.40
(You save $5.30 )
(1 review) Write a Review
SKU:
401573, 401574, 401575, 401576
Adding to cart… The item has been added

401573, 401574, 401575, 401576 SUR-FIT Natura Stomahesive Ostomy Skin Barrier (10/bx)

  • Overall dimension 4" x 4"
  • Cut-to-fit
  • With flange, No tape collar
  • HCPCS Code: A4414
  • 10 per box
  • Item# 401573 Size: 1-1/4" (32mm) flange
  • Item# 401574 Size: 1-1/2" (38mm) flange
  • Item# 401575 Size: 1-3/4" (45mm) flange
  • Item# 401576 Size: 2-1/4" (57mm) flange

ConvaTec’s SUR-FIT Natura® ostomy system is a comprehensive product line with our latest skin barrier technologies. The plastic coupling ring allows the pouch and skin barrier to snap together for audible security. Stomahesive® skin barriers are ideal for people whose stoma output is semi-formed to formed. This reliable skin barrier provides a unique formula that enables the skin barrier to adhere to both dry and moist skin. It is gentle on skin yet holds firmly.

Preparation of Ostomy Skin Barrier/Wafer

Measure your stoma using the measuring guide provided. Select a skin barrier with a flange (white ring) at least 1/2 inch larger than your stoma size. For flush or retracted stomas, convex skin barriers are recommended. Trace the exact same stoma size onto the center white release paper on the back of the skin barrier. Cut along the tracing with a curved scissor. *If using a pre-cut wafer, no cutting necessary. *ConvaTec skin barriers are available in Stomahesive® and Durahesive®, solid and flexible (white or tan collars) with or without convexity. A caulking material, such as Stomahesive® Paste or an Eakin® Cohesive Seal, can be applied to the back of the skin barrier to further fill gaps between the wafer and the stoma. Allow the paste to set for one minute prior to application to the skin. (Do not spread the paste.)

Application of Ostomy Skin Barrier/Wafer

Center the skin barrier over the stoma. Press the skin barrier against the skin. If using a tape bordered skin barrier, remove the remaining backing paper one side at a time. During application, maintain gentle pressure on the skin barrier for 30 seconds to improve adhesion.

Attachment of Colostomy, Ileostomy or Urostomy Pouch

Before attaching the pouch, allow a small amount of air to enter the pouch by gently separating it. If you are using a SUR-FIT Natura® drainable pouch with a clip, for attachment of the tail clip, fold the bottom of the pouch over the tail clip only once. Press firmly on the center of the clip until it snaps securely closed. If you are using a SUR-FIT Natura® urostomy drainable pouch with a tap, make sure the tap on the pouch is closed before attaching pouch to wafer. *If you are using the InvisiClose® tail closure system, a clip-less system, see the instructions for use on the back of this page. Align the flange on the pouch with the flange on the skin barrier. Press them together beginning at the bottom and circling around the top side of the flange. You will hear several clicks as the system locks into place.

Removal of Ostomy Pouch

To easily remove the pouch from the skin barrier, gently pull downward on the plastic pouch tab and lift the pouch off. Anchor the wafer by holding it down
with your other hand.

SUR-FIT Natura® closed-end pouches: Remove and discard as needed. (Do not flush.) Filter covers are waterproof and should be used when bathing or swimming to prevent the filter from becoming wet. Remove filter cover after patting pouch dry.

Removal of Ostomy Skin Barrier/Wafer

Gently pull the skin barrier down, away from the skin, while supporting the adjacent skin with your other hand. To assist with the barrier removal, an AllKare® Adhesive Remover wipe may be used to remove any adhesive buildup.

 

1 Review Hide Reviews Show Reviews

  • 5
    good adherence

    Posted by Unknown on 10th May 2016

    good product for those allergic to the tape collars