Site Information

  • 125261 ConvaTec SUR-FIT Natura Stomahesive Flexible Skin Barrier with Cut-to-Fit Opening and white tape collar (overall dimension 5"x5") and Flange Size: 2-3/4"

125261 SUR-FIT Natura Skin Barrier Cut To Fit Opening (10/bx



Product Description

125261 ConvaTec SUR-FIT Natura Stomahesive Flexible Skin Barrier with Cut-to-Fit Opening (10/bx)

Includes White Tape Collar (overall dimension 5" x 5")

  • Ref#125261
  • Flange Size: 2-3/4" (70mm)
  • HCPCS Code: A4414
  • 10 per box

Stomahesive® skin barriers (wafers) are ideal for people whose stoma output is semi-formed to formed stool.  This reliable skin barrier provides a special formula that enables it to adhere to both dry and moist skin.  It holds firmly to skin while helping to protect against irritating output.  Another feature of the Stomahesive® skin barrier is an outer protective coating which helps keep it in place.  This skin barrier should maintain adhesion to the skin when showering, bathing, and swimming.  Plus, Stomahesive® skin barriers are easy to fit, apply, and remove.  If the skin around your stoma is uneven from scars, crevices, or indentations, you can use ConvaTec's Stomahesive Paste 183910.  Also, to provide added protection to the peristomal skin from output, you can try their Eakin Cohesive Seals 839002.

Preparation of the SUR-FIT Natura® Skin Barrier/Wafer

Measure your stoma using the measuring guide provided. Select a skin barrier with a flange (white ring) at least 1/2 inch larger than your stoma size. For flush or retracted stomas, convex skin barriers are recommended.

Trace the exact same stoma size onto the center white release paper on the back of the skin barrier.

Cut along the tracing with a curved scissor. *If using a pre-cut wafer, no cutting necessary. *ConvaTec skin barriers are available in Stomahesive® and Durahesive®, solid and flexible (white or tan collars) with or without convexity.

A caulking material, such as Stomahesive® Paste or an Eakin® Cohesive Seal, can be applied to the back of the skin barrier to further fill gaps between the wafer and the stoma. Allow the paste to set for one minute prior to application to the skin. (Do not spread the paste.)

Application of SUR-FIT Natura® Skin Barrier/Wafer

Center the skin barrier over the stoma.

Press the skin barrier against the skin. If using a tape bordered skin barrier, remove the remaining backing paper one side at a time.

During application, maintain gentle pressure on the skin barrier for 30 seconds to improve adhesion.


Find Similar Products by Tag

Find Similar Products by Category

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!