125265 SUR-FIT Natura Stomahesive Flexible Skin Barrier with Flange (10/bx)

with tan tape collar and cut-to-fit opening (overall dimension 5"x5")

ConvaTec SUR-FIT® Natura® Stomahesive® Up to 1-3/4" Cut-to-Fit Flexible Skin Barrier 2-1/4" Flange, Tan

• 10/bx
• Stoma Opening: Up to 1-3/4" cut-to-fit, flat
• Flange Size: 2-1/4" (57mm)
• HCPCS Code: A4414
• 10 per box
• Color Code: RED

ConvaTec’s SUR-FIT Natura® ostomy system is a comprehensive product line with our latest skin barrier technologies. The plastic coupling ring allows the pouch and skin barrier to snap together for audible security. Stomahesive® skin barriers are ideal for people whose stoma output is semi-formed to formed. This reliable skin barrier provides a unique formula that enables the skin barrier to adhere to both dry and moist skin. It is gentle on skin yet holds firmly.  If the skin around your stoma is uneven from scars, crevices, or indentations, you can use ConvaTec's Stomahesive Paste 183910.  Also, to provide added protection to the peristomal skin from output, you can try their Eakin Cohesive Seals 839002. Odor  from stool and flatulence can be controlled by using a variety of products, but the most popular is Devrom. 

Preparation of the SUR-FIT Natura® Skin Barrier/Wafer

1. Measure your stoma using the measuring guide provided. Select a skin barrier with a flange (white ring) at least 1/2 inch larger than your stoma size. For flush or retracted stomas, convex skin barriers are recommended.
2. Trace the exact same stoma size onto the center white release paper on the back of the skin barrier.
3. Cut along the tracing with a curved scissor. *If using a pre-cut wafer, no cutting necessary. *ConvaTec skin barriers are available in Stomahesive® and Durahesive®, solid and flexible (white or tan collars) with or without convexity.
4. A caulking material, such as Stomahesive® Paste or an Eakin® Cohesive Seal, can be applied to the back of the skin barrier to further fill gaps between the wafer and the stoma. Allow the paste to set for one minute prior to application to the skin. (Do not spread the paste.)

Application of SUR-FIT Natura® Skin Barrier/Wafer

1. Center the skin barrier over the stoma.
2. Press the skin barrier against the skin. If using a tape bordered skin barrier, remove the remaining backing paper one side at a time.
3. During application, maintain gentle pressure on the skin barrier for 30 seconds to improve adhesion.

Removal of ConvaTec SUR-FIT Natura Skin Barrier/Wafer

1. While supporting the skin with one hand, use your other hand to gently pull the edge of skin barrier down (away from the skin).
2. You can make removal easier by using an adhesive remover product like AllKare Adhesive Remover Wipes and Sensi-Care Sting Free Skin Adhesive Releaser.